Low Engergy Consumption Belt Filter Waste Water Treatment Good Filtration Effection
Product Description:
A belt filter using three belts can achieve independent speeds and have different belt types for the pressure and gravity zones. This allows the filter system to accommodate higher hydraulic loadings occurring with dilute feed sludge (feed solid concentration below 1.5%). The three belt system is more efficient with both a higher production rate and cake solid concentration at the expense of mechanical complexity.
In the compression zone of a belt press filter, the filter cake is compressed between the two belts and passed over rollers to exert pressure on the cake. There is an optimum number of rollers above which a drier product is not necessarily the result. Drier product is obtained from reduced belt speed rather than increased pressing time.
The efficiency of a belt press filter is often assessed based on the dry solids content of the product cake, solids recovery and lateral migration of sludge on the belt.
Structure of Belt Filter:
| 1 | Filter Cloth Washing | 8 | Filter Cloth Tension Unit |
| 2 | Belt Washing | 9 | Discharge Roll |
| 3 | Cake Washing Box | 10 | Drive Pulley |
| 4 | Slurry Feeding Hopper | 11 | Driven Pulley |
| 5 | Rubber Belt | 12 | Vacuum Box |
| 6 | Filter Cloth | 13 | Filter Support Frame |
| 7 | Filter Cloth Tracking Unit | | |
Technical Parameters:
| Filtration Area (m2) | Effective Width (mm) | Effective Length (mm) | Total Length (mm) | Frame Width (mm) | Frame Height (mm) | Vaccum Consumption (m3/min) |
| 2 | 500 | 4000 | 8100 | 1100 | 2070 | 8 |
| 3 | 500 | 6000 | 10100 | 1100 | 2070 | 12 |
| 8 | 1000 | 8000 | 12100 | 1600 | 2070 | 25 |
| 12 | 1000 | 12000 | 16100 | 1600 | 2070 | 30 |
Applications:
| Application of Materials | Liquid / Solid Ratio |
| Ciric Acid | 5/1 - 3/1 |
| Zinc Oxide | 10/1 |
| Ferromagnet | 2.5/1 - 4/1 |
| Sulphur Mine | 4/1 - 2.5/1 |
| Coal Ash | 10/1 |
| Gold Mine | 2/1 |
| Sulphuric Sludeg | 1.5/1 |
| Alumine | 5/1 - 4/1 |
| Wet Cement | 2/1 |
| Mining Tailings | 6/1 |
| ABS Resin | 10/1 |
Support and Services:
- Installation and setup assistance
- Regular maintenance and troubleshooting support
- Training for operators and maintenance personnel
- Customized design and engineering solutions for unique applications
- Onsite repair and replacement services
- 24/7 emergency support
FAQ:
Q1: How to process an order for belt filter?
A: The product is customized, first of all, please provide your requirement details, our engineers will provide the prelimianry plan for your reference.
Q2: Do you offer guarantee?
A: Yes, we offer one year guarantee from the date of commissioning.
Q3. Can you offer Design Service?
A: Yes, we could design full solution drawings as per client's request.
